Probably you went for a general checkup of your Toyota Tundra, but you see the maintenance light is still on. You have yet to turn it off. So, how to reset the maintenance light on Toyota Tundra so that the light turns off?
First, turn your car’s key to the ON position to open Accessory mode. Then click the Trip Odometer button. When you can see ‘Trip A’ written on the screen, turn the Tundra off. Now keep pressing the Trip Odometer button again.
Continue pressing until you turn on the car and go to the accessory mode to see the ‘Trip A’ on display once again. Then turn Tundra Off and wait for a few seconds, and turn it On once more time. In this way, the maintenance light will reset. .
However, the reset maintenance may vary for different models. We’ll cover them today along with some issues that Toyota Tundra may face. Let’s get into it.
A to Z of The Toyota Tundra Maintenance Light
Each vehicle model has their unique details and styles, so any element from one vehicle can define different problems. For example, blinking of the dashboard lights can mean minor problems to some cars while it can mean serious problems in another.
Usually, for the Toyota car models, the maintenance light comes on the dashboard as “MAINT REQD”. This light doesn’t blink, it remains active permanently as long as the car is on. Usually, for most Toyota cars, you can see this light active when the odometer counting goes up to 5000 miles.
The active maintenance light may not be a threat to your car, but the reason it is on can have serious problems later. Because this light lets you know that the oil is running out and you gotta change the oil as soon as possible.
So, if you ignore the light as it doesn’t have a direct effect on the car, the oil level will gradually decrease, which will make your ride bumpier and many parts of the car will be worn out.
Maintenance Light Vs Check Engine Light: What’s the Difference?
A maintenance light indicated that you need an oil change, inspection and filter replacement. So, in short, you can say that the maintenance light only gets on when your car requires any service; it never indicates that there is any wrong with your vehicle.
On the other hand, the Check Engine light possesses a warning, which makes it more crucial than the maintenance light. If there are any major problems, or specific problems regarding the engine, your car will activate the check engine light.
When this happens, you should take the car to the mechanic without any delay for checkups and diagnosis. The reason we are informing you about this light is that sometimes people mistake the lights for each other, and their reset procedure is totally different.
Toyota Tundra Maintenance Light Reset for Different Models
Although the process of resetting the maintenance light is quite similar for Toyota Tundra models, they can also vary a bit. Some models require just a few simple steps, while some models can take a detour.
Toyota Tundra 2000 to 2017 Model
All the Toyota Tundra models from 2000 to 2017 share a similar procedure for resetting the maintenance light. These models have a built-in maintenance reminder; when the vehicle requires maintenance, you’ll see messages on the odometer instrument cluster.
If you want to re-adjust the light,
- First, turn the ignition ON but don’t start the engine
- Then press the Trip Odometer button and turn the ignition OFF
- After that, you’ll need to turn the ignition key ON once again while pressing the Odometer Trip A knob
A few moments later, you’ll see all the lines have disappeared and turned to zeroes, and that’s how the light resetting process will be completed.
Toyota Tundra 2018 to 2021 Model
For Tundra models from 2018 to 2021, resetting the maintenance light takes less time and effort.
- Turn ON the ignition first and go to the menu on display first.
- Then click the ‘Setting’ and press ‘Maintenance Reset’
- Just click ‘YES’ to finish the resetting process.
Note: You may check out the following video for a better understanding of resetting the maintenance light on a Toyota Tundra.
FAQs
We answered a few common questions here.
- Why does my Toyota Tundra say ‘Maintenance Required?
Usually, after you ride 5000 miles with your Toyota Tundra, it’ll warn you of an oil change. You’ll see the ‘Maintenance Required’ message on the instrument panel as the warning. Go for an oil change and reset the notification and maintenance light.
- Can I drive a Toyota with the maintenance light on?
Yes, you can drive your Toyota while the maintenance light is still on.However, it’s better to go for the service as soon as possible because low oil can make the car parts wear out fast. !
- How Long Can Maintenance Light Stay On?
Your car can go 500 miles of driving with a flashing oil light, but it will become a serious problem after that. There can be some mechanical problems if you don’t change the oil when there is hardly any oil left in the tank .
Conclusion
As you already know how to reset maintenance light on Toyota Tundra, you can easily solve this problem anytime. However, try to follow the instructions properly otherwise, it can be pretty annoying to turn off the light after several failed attempts.
Meta Description
Are you looking for how to reset maintenance light on Toyota Tundra? All you have to do is use the Trip Odometer knob. For detailed steps, click here!
