Why 1998 Toyota Camry Brake Lights Not Working

Why 1998 Toyota Camry Brake Lights Not Working – How To Fix

The 1998 Toyota Camry Brake lights not working is a common problem you will encounter. However, you can fix this problem by replacing the existing bulb with a new 3157 standard bulb. Besides, there could be other technical issues with your 1998 Camry since it is the fourth generation model, which is quite old.

It is the 4th generation model, which is currently out of stock. So, you will most probably find a second-hand version. So it is anticipated for 1998 Camry users to encounter numerous technical issues and long-lasting problems.

However, most of the 1998 Toyota Camry‘s technical issues are fixable with appropriate manuals. So based on the quality of a 1998 Toyota, this model should last as much as 15 years easily.

Why 1998 Toyota Camry Brake Lights Not Working?

The 1998 Toyota Camry is one of the oldest versions of the Camry you will find on the market. You may not get to buy a brand new 1998 model Camry on the present market anymore. However, if you own a second-hand version or a very old model since the first release, you can face numerous problems like brake lights not working.

Also, in most cases, you may encounter a 1998 Camry brake not working due to electrical issues. The best solution to avoid this problem is to replace the light bulb on your 1998 Toyota Camry.

Read How To Open Camry Trunk From Inside

How To Fix 1998 Toyota Camry Brake Lights Not Working?

Most Toyota Camry cars available today are mostly part of the 8th generation. So, a 1998 Camry is quite old and unavailable. So, if you face a 1998 Toyota Camry with brake lights not working, follow the instructions below.

To fix the 1998 Toyota Camry Brake, you will need some necessary tools, which are:

  1. Hood Prop
  2. Screw Driver
  3. Dielectric Grease

Fix Toyota Camry 1998 Brake light:

  1. Take a 3157 Bulb
  2. Now on the inside of the trunk, passenger side rear, remove the panel that blocks you from accessing or repairing the brake light.
  3. Remove the clip using a screwdriver. You will be able to open the retainer.
  4. Twist the old brake light clockwise to exclude it from the connection and the holder.
  5. Now, add some dielectric grease into the holder, then put the new 3157 model bulb in the holder.
  6. Before putting the bulb back in the brake light section, use the hood prop one end against the brake paddle and one end against the seat to activate the brake and see if the bulb is glowing or not.

These steps should fix the problem of your brake lights not working. However, if the problem is not solvable, you may have a problem with the cable. Try changing your 1998 Toyota Camry brake light wires. If you have no experience, take your car to a Toyota Camry garage or a car servicing center near you.

How To Fix 1998 Toyota Camry Brake Lights Not Working

Read How To Use Sport Mode Toyota Camry

Why 1998 Toyota Camry Brake Lights Need To Work?

The 1998 Toyota Camry brake light must work because it will allow you to avoid sudden accidents or unpredictable events. When driving your vehicle on highways or busy roads, it is necessary to warn other drivers that you are slowing down.

However, this is something you need to signal to other drivers. Your brake lights act as a direct signal to other drivers and let them know that you are slowing down your speed.

How Long It Takes To Fix This Problem?

If the problem is with the bulb, you can fix it easily with basic knowledge and some necessary tools. However, it may take 20-30 minutes to fix this issue or an hour in some circumstances. However, sometimes it is not a small problem and may take longer than usual.

How Much To Fix This Problem?

Fixing the 1998 version of the Toyota Camry brake light will cost you somewhere near 10$-15$. Depending on the present value of a 3157 bulb, the price can be ranged up to more or less. If you don’t want to repair it all by yourself, you can take your car to a car servicing center.

Depending on the problem, taking your Toyota Camry to a car servicing center will solve most problems but will cost you around 15$-20$.


1998 Toyota Camry brake lights not working is not a chronic problem. As mentioned earlier in the content, you can fix this problem yourself with a proper manual. So, solving this problem should be quite easy.

However, since the model is very old and out of stock, you may encounter many technical issues. So, the best way you can avoid complex problems with your Toyota Camry 1998 is to take your Camry to a car service center from time to time. It is best to replace the problematic part of your 1998 Camry instead of repairing it.

Leave a Comment

Your email address will not be published. Required fields are marked *